Lifetime Prediction of Plastic Parts - Case Studies |
Paul J. Gramann, Ph.D., The Madison Group
Javier Cruz, Ph.D., The Madison Group
Jeffrey A. Jansen, M.S., The Madison Group |
ANTEC 2012 |
| Simulate Your Way to a Better Mold |
Erik Foltz |
Moldmaking Technology (August 2011) |
| Fractography of Pipe Failures |
Jeffrey A. Jansen, Thomas G. Loken |
ANTEC 2011 |
| Proset Rubber Gasket Failure |
Paul J. Gramann |
Press Release |
| Ductile - to - Brittle Transition of Plastic Materials |
Jeffrey A. Jansen |
Advanced Materials & Processes |
A Study of the Freezing Phenomena on PVC and CPVC Pipe Systems |
Javier Cruz, Bruce Davis, Paul Gramann and Antoine Rios |
ANTEC |
Using DSC to Determine the Quality of PVC |
Paul Gramann and Javier Cruz |
ANTEC |
| Characterization of Plastics in Failure Analysis |
Jeffrey A. Jansen |
From "Tools and Techniques in Failure Analysis" |
Development
of the Fiber Reinforced Thermoset DaimlerChrysler 4.7 L V-8
Engine Valve Cover |
Steve Crawford, Mark Dixon and Paul Gramann |
Automotive Composites |
| The Evaluation of Appliance Hose and Tubing Failures |
Jeffrey A. Jansen |
IATC |
| Failure Analysis of a Polysulfone Flow Sensor Body – A Case Study |
Jeffrey A. Jansen |
Practical Failure Analysis |
| Potential of Subrogation Recovery |
Paul Gramann, Antoine Rios and Bruce Davis |
NASP |
| Environmental Stress Cracking – THE PLASTIC KILLER |
Jeffrey A. Jansen |
Advanced Materials & Processes |
Failure of Plastic Plumbing Products |
Paul Gramann, Antoine Rios and Bruce Davis |
Antec |
| Finding Fault: Impartial failure analysis needed to solve part problems |
Jeffrey A. Jansen |
Appliance Design |
| Allocating
Responsibility when a Plastic Part Fails |
Paul Gramann, Bruce Davis and Antoine Rios |
NASP |
| Fractographic Characterization of Polycarbonate Failure Modes |
Jeffrey A. Jansen |
ANTEC |
| Compression Molding (order online) |
Bruce Davis, Paul Gramann, Tim Osswald and
Antoine Rios |
Hanser Publications |
| Effect
of Fiber Orientation Anisotropies on the Structural Performance
of Molded FRP Composite Parts |
Antoine Rios, Bruce Davis and Paul Gramann |
|
| Computer
Aided Engineering in Compression Molding |
Antoine Rios, Bruce Davis and Paul Gramann |
CFA |
| Injection Molding Handbook (order online) |
Edited by Paul Gramann, Tim A. Osswald and
Tom Turng |
Hanser Publications |
| Turbo
ScrewT, New Screw Design for Foam Extrusion |
Fogarty, Jim, Dave Fogarty, Chris Rauwendaal
and Antoine Rios,SPE ANTEC |
Antec |
| Polymer
Processing Simulations Trends |
Tim Osswald and Paul Gramann |
SAMPE, Erlangen, Germany |
| Making
the Breaker Plate of an Extruder an Efficient Mixing Device
|
Rios, A.C., E. Santanach, P.J. Gramann, and
C.J. Rauwendaal, Plastics Additives & Compounding, Elsevier,
p 30-33 |
Plastics
Additives & Compounding |
| CAMPUS®
- Free, Highest Quality Data for Material Selection and Product
Design form over 45 Global resin Suppliers |
Gramann, P.J. , A. Rios, R. Shastri, and J.
Liccese, PD3 - SPE Magazine, Issue #1-00 |
PD3 - SPE Magazine |
| Backmixing
in Screw Extruders |
P.J. Gramann and C. Rauwendaal |
Antec |
| Experimental
and Numerical Study of Rhomboidal Mixing Sections |
Rios, Antoine C., Maria del P. Noriega, Paul
J. Gramann and Tim A. Osswald, Inter. Poly. Proc., 15, 1,
p.12 |
International
Polymer Processing |
| New Dispersive
and Distributive Mixers for Extrusion and Injection Molding
|
P.J. Gramann and C. Rauwendaal |
Antec |
| A New
Dispersive and Distributive Static Mixer for the Compounding
of Highly Viscous Materials |
P.J. Gramann, B.. Davis, T.A. Osswald, and
C. Rauwendaal. |
Antec |
| Experimental
Study of New Dispersive Mixer |
C.Rauwendaal, A. Rios, T. Osswald, P. Gramann,
B. Davis, M. Noriega, and O. Estrada |
Antec |
| Analysis of Flow In Screw Extruders, Effect
of Kinematic Conditions |
C. Rauwendaal, T. Osswald and P. Gramann |
International
Polymer Processing |
| Polymer Processing Fundamentals (order online) |
Tim A. Osswald |
Hanser Publications |
| Grooved
Feeds Single Screw Extruders - Improving Productivity and
Reducing Viscous Heating Effects |
B.A. Davis, P.J. Gramann, M.D.P. Noriega E.
and T. Osswald |
Polymer
Engineering & Science |
| A New
Dispersive Mixer for Single Screw Extruders |
C. Rauwendaal, B.A. Davis, P.J. Gramann, and
T.A. Osswald |
Antec |
| Why
Corrosion Resistant Screws Can Bind in the Extruder Barrel
|
C. Rauwendaal and P.J. Gramann |
Antec |
| Comparative
Study of Rhomboidal Distributive Mixing Selections Using Computer
Modeling |
A.C. Rios, P.J. Gramann, E. Stanfield, and
T. Osswald |
Antec |
| Experimental Study of Various Mixing Sections
In a Single Screw Extruder |
A.C. Rios, T.A. Osswald, M.P. Noriega, and
O.A. Estrada |
Antec |
| |
|
| Optimization
of the Compression (Injection/Compression) Molding Process
Using Numerical Simulation |
Richard Theriault, Tim Osswald and Linards
Stradins |
ASME |
| Properties
of Thermosetting Polymers During Cure |
Richard Theriault, Tim Osswald and Linards
Stradins |
Antec |
| Fiber-Matrix
Separation in Ribbed SMC and BMC Part |
Bruce Davis, Richard Theriault and Tim Osswald |
Antec |
